7558-xxx
Detach the ATC sensor PCB bracket from the machine and remove.
11.
ATC sensor PCB removal
Remove the printer front door. See
1.
Remove the transfer belt cleaner. See
2.
3.
Remove the waste toner box.
Remove the four photoconductor units.
4.
5.
Remove the four toner supplies.
Remove the operator panel front cover. See
6.
Remove the printhead retract door. See
7.
8.
Remove the inner cover. See
Disconnect the five cables (A) from the ATC sensor PCB.
9.
Service Manual
4-30
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
A
4-13.
4-178.
4-145.
4-4.
Previous
Next
Go Back
4-8.