Table of Contents
Advertisement
Step
Action and questions
Check the sensor (ADF pre
6
registration) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch ADF/SCANNER
SENSOR TESTS.
4. Touch Sensor (ADF pre
registration).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (ADF pre
7
registration) for proper
connection.
Is the above component
properly connected?
Check the ADF feed motor for
8
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch ADF/SCANNER
MOTOR TESTS.
4. Touch ADF feed motor
(forward).
5. Touch ADF feed motor
(reverse).
Does the above component
operate properly?
Check the ADF feed motor for
9
proper connection.
Is the above component
properly connected?
Yes
Go to step 8.
Replace the sensor (ADF pre
registration). Go to
"Sensor
(ADF pre-registration)
removal" on page
4-244.
Go to step 10.
Replace the ADF feed motor. Go
to
"ADF feed motor removal"
on page
4-209.
7558-xxx
No
Go to step 7.
Replace the connections.
Go to step 9.
Replace the connections.
Diagnostic information
Previous
Next
Go Back
2-149
Advertisement
Table of Contents
