7558-xxx
Pull out the LVPS front fan guide.
5.
Disconnect the cable (B) from the LVPS front fan guide.
6.
7.
Detach the harness from the LVPS front fan guide.
Remove the LVPS front fan guide.
8.
LVPS PCBA removal
Warning: Before removing the LVPS PCBA, using a permanent marker, place unique markings on connections
P91 and P92 to ensure that these two cables are properly reconnected, or damage will occur to the
machine.
Remove the printer right side cover. See
1.
Remove the LVPS subfan guide. See
2.
Remove the waste toner sensor guide. See
3.
Service Manual
4-112
"Printer right cover removal" on page
"LVPS front fan guide removal" on page
"Waste toner sensor guide removal" on page
4-14.
4-111.
4-196.
Previous
Next
Go Back