Table of Contents
Advertisement
7558-xxx
Reinstallation warning: When reinstalling the developer housing, ensure that the printhead retract levers are in
Previous
their uppermost position as shown in the following image, or damage will occur to the machine.
Next
Go Back
If the developer housing is installed correctly, the bracket (C) can be mounted over the developer housing
without difficulty. If the developer housing does not seem to install easily, do not force the part into the machine.
Ensure that the printhead retract lever is in the uppermost position, and try to slide it in again.
C
Repair information
4-71
Advertisement
Table of Contents
