Table of Contents
Advertisement
Remove the two front screws and the two rear screws securing the bracket (C) to the finisher.
10.
Front
Remove the bracket (C).
11.
12.
Release the hook from the upper media exit roll drive gear 20T(D).
Remove the upper media exit roll drive gear 20T.
13.
Remove the 6 mm bushing.
14.
Use a prying tool to remove the e-clip securing the upper media exit roll assembly (F) to the front of the
15.
finisher.
Remove the 6 mm bushing (E).
16.
Rear
B
C
Repair information
7558-xxx
Previous
Next
Go Back
4-425
Advertisement
Table of Contents
