Remove the six screws (G) securing the PC/developer drive motor to the machine.
13.
14.
Remove the PC developer drive motor from the machine.
Pick roller removal
Remove the appropriate feeder unit. See
1.
media feeder removal" on page
tray 3 feeder removal" on page
Slide the plastic media guide toward the front of the machine.
2.
"Printer tray 1 feeder removal" on page
4-281,
"TTM tray 4 media feeder removal" on page
4-290.
7558-xxx
4-144,
"Tray module
4-294, or
"TTM
Repair information
4-141
Previous
Next
Go Back