Sensor (Ttm Media Size) Removal; Sensor (Ttm Tray 3 Feedout) Removal - Lexmark X95 series Service Manual

7558-xxx

Sensor (TTM media size) removal

This removal procedure can be applied to either TTM tray 3 media tray or TTM tray 4 media tray.
Pull the appropriate TTM media tray from the machine.
1.
Remove the screw (A).
2.
3. Disconnect the cable (B).
Remove the sensor (TTM media size).
4.

Sensor (TTM tray 3 feedout) removal

1. Open the left door.
Remove the lower tray module media transport roller. See
2.
page 4-286.
Service Manual
4-276
"Tray module transport rollers removal" on
Previous
Next
Go Back