Table of Contents
Advertisement
7558-xxx
Release the hook (E) securing the decurler clutch to the machine.
9.
Slide the decurler clutch away from the machine, and remove it.
10.
Reinstallation note: When replacing the decurler clutch, ensure that the hook on the decurler clutch is
captured by the boss on the bracket.
Sensor (bridge media entrance) removal
Remove the bridge unit assembly. See
1.
Place the bridge unit assembly upside down.
2.
Service Manual
4-312
"Bridge unit assembly removal" on page
4-305.
Previous
Next
Go Back
Advertisement
Table of Contents
