Remove the finisher front door assembly.
3.
Reinstallation note: Make sure the actuator molded in the finisher front door assembly properly engages the
switch (finisher front door interlock) (B). The two magnetic catches (C) should properly engage the finisher.
Finisher left carrage belt assembly removal
Remove the rear upper cover. See
1.
Remove the finisher front door assembly. See
2.
Move the slip clutch gear 24T (A) toward the rear to disengage the stacker bin (B).
3.
A
B
B
"Rear upper cover removal" on page
"Finisher front door assembly removal" on page
7558-xxx
C
Actuator
C
4-380.
4-348.
Repair information
4-349
Previous
Next
Go Back