Table of Contents
Advertisement
7558-xxx
Disconnect the cable from the sensor (printer left duplex door interlock).
8.
Release the four tabs securing the sensor (printer left duplex door interlock) to the bracket.
9.
10.
Remove the sensor (printer left duplex door interlock) from the bracket.
Sensor (printer left front door interlock) removal
Remove the printer front door. See
1.
2.
Remove the transfer belt cleaner. See
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
Remove the four toner supplies.
5.
Remove the operator panel front cover. See
6.
7.
Remove the printhead retract door. See
Remove the inner cover. See
8.
Service Manual
4-160
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
"Printhead retract door removal" on page
"Inner cover removal" on page
4-13.
4-178.
4-145.
4-4.
Previous
Next
Go Back
4-8.
Advertisement
Table of Contents
