7558-xxx
Sensor (stacker bin level R) removal
Remove the finisher front door assembly. See
1.
2.
Remove the rear upper cover. See
Disconnect the connector from the lift tray height sensor (stacker bin level R) (A).
3.
4.
Remove the screw securing the sensor (stacker bin level R) (A).
Remove the sensor (stacker bin level R) (A).
5.
Sensor (stacker bin level encoder) removal
1.
Remove the rear upper cover. See
Disconnect the connector from the sensor (stacker bin level encoder) (A).
2.
Release the harness from the clamp.
3.
Remove the screw securing the bracket (B) from the stacker bin lift motor assembly (C).
4.
Service Manual
4-402
"Finisher front door assembly removal" on page
"Rear upper cover removal" on page
Connector
A
"Rear upper cover removal" on page
A
B
Clamp
C
4-380.
Rear
4-380.
Connector
Clamp
Rear
Previous
4-348.
Next
Go Back