Clamp Drive Motor Removal - Lexmark X95 series Service Manual

7558-xxx
Move the buffer pinch guide assembly (A) to the right to remove the two bosses from the holes in the
6.
finisher.

Clamp drive motor removal

Remove the rear upper cover. See
1.
2. Remove the upper media bin assembly. See
Remove the two media eject unit springs (A) attached to the media eject unit assembly (B) by pushing
3.
them downward.
Service Manual
4-340
Hole in rear frame
Boss
"Rear upper cover removal" on page
"Upper media bin assembly removal" on page
Right
A
A
4-380.
B
Previous
Next
Go Back
4-422.