Sensor (Registration) Lag Jam; Sensor (Media On Belt) Static Jam - Lexmark X95 series Service Manual

7558-xxx
Step Action and questions
Check the tray module lower
13
transport motor for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch 1TM/3TM/TTM lower
transport motor.
Does the above component
operate properly?
Check the tray module lower
14
transport motor for proper
connection.
Is the above component
properly connected?
Perform a print test. Go to
15
"PRINT TESTS" on page
Does the error continue?

200.55 Sensor (registration) lag jam

See
"200.05/200.55 Sensor (registration) lag jam" on page

201.01 Sensor (media on belt) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (media on belt )
2
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (paper on
belt).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Service Manual
2-98
Yes
Go to step 7.
Replace the tray module lower
transport motor.
Go to
"Tray module lower
transport motor removal" on
page 4-280.
Replace the lower engine PCBA.
3-25.
Go to
"Lower engine PCBA
removal" on page
Yes
Go to step 2.
Go to step 4.
No
Go to step 6.
Replace the connection.
Problem resolved
4-104.
2-93.
No
Remove any media or media
fragments.
Go to step 3.
Previous
Next
Go Back