Table of Contents
Advertisement
7558-xxx
To change this setting:
1.
From the Configuration Menu, navigate to UI Automation.
Touch
or
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
USB Scan to Local
To change this setting:
From the Configuration Menu, navigate to USB Scan to Local.
1.
Touch
or
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
USB Speed
To change this setting:
From the Configuration Menu, navigate to USB Speed.
1.
Touch
or
2.
Touch Submit to save the setting, or touch Back to return to the Configuration Menu without saving any
3.
changes.
Wipe All Settings
The purpose of this setting is to make any sensitive information that may exist on the device's storage
completely indecipherable.
To run this setting:
From the Configuration Menu, navigate to Wipe All Settings.
1.
The screen displays the following messages
2.
Erase all information on the hard disk?
This will erase all settings, solutions, and jobs on this device.
Touch Yes to erase, or touch No to cancel the operation and return to the Configuration Menu without
3.
saving any changes.
Service Manual
3-16
to change the value.
to change the value.
to change the value.
Previous
Next
Go Back
Advertisement
Table of Contents
