Printer Tray 1 Feeder Removal - Lexmark X95 series Service Manual

7558-xxx
Detach the front of the printer media turn guide, and then detach the back of the printer media turn guide.
5.
Remove the printer media turn guide.
6.

Printer tray 1 feeder removal

Pull the media tray 1 out from the machine.
1.
2. Remove the left rear lower cover. See
Remove the MPF tray feeder. See
3.
Remove the printer media turn guide. See
4.
5. Remove the registration transport roller. See
page 4-149.
Disconnect the cable (A).
6.
Release the two harness from the clamps (B).
7.
Remove the two screws (C).
8.
Service Manual
4-144
"Left rear lower cover removal" on page
"MPF tray feeder removal" on page
"Printer media turn guide removal" on page
"Registration/transport roller assembly removal" on
4-7.
4-128.
4-143.
Previous
Next
Go Back