Remove the e-clip (D) securing the waste toner shaft gate to the machine.
23.
Remove the two screws (E) securing the waste toner gear bracket (F) to the machine.
24.
25.
Remove the waste toner gear bracket.
Remove the waste toner shaft gate.
26.
Y toner auger removal
Remove the printer front door. See
1.
2.
Remove the transfer belt cleaner. See
Remove the waste toner box.
3.
Remove the four photoconductor units.
4.
Remove the four toner supplies.
5.
Remove the operator panel front cover. See
6.
"Printer front door removal" on page
"Transfer belt cleaner removal" on page
"Operator panel front cover (MFP) removal" on page
7558-xxx
4-13.
4-178.
4-8.
Repair information
4-199
Previous
Next
Go Back