Sensor (Bridge Media Exit) Removal - Lexmark X95 series Service Manual

7558-xxx
Disconnect the cable (C) from the sensor (bridge media entrance).
6.
Remove the sensor (bridge media entrance).
7.

Sensor (bridge media exit) removal

1. Remove the bridge unit assembly. See
Remove the bridge de-curler top cover. See
2.
Remove the three screws (A) securing the long metal bracket to the machine.
3.
Note: When detaching the long metal bracket, you do not have to remove the harness from the clamps.
Service Manual
4-314
"Bridge unit assembly removal" on page
"Bridge decurler top cover removal" on page
4-305.
4-302.
Previous
Next
Go Back