Reset Separator Roll And Pick Assembly Counter; Go Back; Reset Fuser Count; Usb Scan To Local - Lexmark X746de Service Manual

7526
Disk Encryption (if hard disk is
installed)
Wipe Disk (if hard disk is installed)
Wipe All Settings
Duplex Gloss
Font Sharpening
Require Standby
UI Automation
LES Applications
Key Repeat Initial Delay
Key Repeat Rate
Clear Custom Status
Pel Blurring
USB Speed
Automatically Display Error Screens
Exit Config Menu

Reset Separator Roll and Pick Assembly Counter

This setting enables you to reset the value of the Separator Roll and Pick Assembly's maintenance counter to
zero (0) after replacing it.

Reset Fuser Count

Resets the fuser count value to zero. The Event Log records each time that a user executes the Reset Fuser
Count operation. See
Maintenance Warning and Intervention function is enabled in the printer Configuration ID.
To reset the fuser count:
Touch Reset Fuser Cnt from the Config Menu.
1.
Touch Reset Fuser Cnt again.l
2.
You are returned to the Configuration Menu.

USB Scan to Local

This setting allows you to limit or expand the uses for the USB device on the front of the multiple function printer.
If you select On (the default), the contents of the USB device can be viewed or saved on another device, such
as an USB-connected computer. If you select Off, only the MFP can view the USB device contents.
To change the setting:
Touch USB Scan to Local from the Config Menu.
1.
Touch the
2.
Touch Submit.
3.
Touch Back to return to the Configuration Menu screen.
Service Manual
3-30
See
"Disk Encryption" on page
See
"Wipe Disk" on page
See
"Wipe All Settings" on page
See
"Duplex Gloss" on page
See
"Font Sharpening" on page
See
"Require Standby" on page
See
"UI Automation" on page
See
"LES Applications" on page
See
"Key Repeat Initial Delay" on page
See
"Key Repeat Rate" on page
See
"Pel Blurring" on page
See
"Pel Blurring" on page
See
"USB Speed" on page
See
"Automatically Display Error Screens" on page
This selection exits Configuration Menu, and then Resetting the
Printer displays. The printer performs a POR and returns to normal
mode.
"Event Log" on page 3-32
or arrows to select either Off or On.
3-41.
3-42.
3-43.
3-43.
3-43.
3-43.
3-44.
3-44.
3-44.
3-45.
3-45.
3-46.
for more information. This setting only appears if the
3-44.
3-47.
Previous
Next

Go Back