Lcd Cursor Y Position Register; Table 8-7 Lcd Cursor Y Position Register Description - Motorola MC68VZ328 User Manual

Table 8-6. LCD Cursor X Position Register Description (Continued)
Name
CXPx Cursor X Position 9–0—These bits represent the cursor's
Bits 9–0 horizontal starting position, X, in terms of pixel count (from 0
to XMAX).
8.3.6

LCD Cursor Y Position Register

The LCD cursor Y position (LCYP) register is used to determine the vertical pixel position of the cursor on
the LCD panel. The bit assignments for the register are shown in the following register display. The
settings for the bits in the register are listed in Table 8-7.
LCYP
BIT 15 14
TYPE
0 0
RESET
Table 8-7. LCD Cursor Y Position Register Description
Name
Reserved Reserved
Bits 15–9
CYPx Cursor Vertical Y Pixel 8–0—These bits represent the cursor's vertical
Bits 8–0 starting position, Y, in terms of pixel count (from 0 to YMAX).
Description
LCD Cursor Y Position Register
13 12 11 10 9
CYP
0 0 0 0 0
Description
LCD Controller
See description.
8 7 6 5
CYP CYP CYP
8 7 6 5
rw rw rw rw
0 0 0 0
0x0000
Programming Model
Setting
0x(FF)FFFA1A
4 3 2 1
CYP CYP CYP CYP
4 3 2 1
rw rw rw rw
0 0 0 0
Setting
These bits are reserved
and should be set to 0.
See description.
BIT 0
CYP0
rw
0
8-13