finisher.
1.
Take out from the box, and remove the filament tape and packing material.
2.
Remove the finisher and finisher front right cover from the machine.
3.
Perform steps 1 to 17 of the installation procedure for the "Internal finisher SR3130".
4.
Change the fixing position of the bracket [A] of the bottom plate ( ×1).
5.
Replace the lock holder of the bottom plate with the lock holder [A] provided ( ×1).
6.
Attach the main power switch cover.
7.
Pass the shafts [B] of the punch unit [A] through the bearings [C] of the bottom plate, and
attach to the machine ( ×1, knob screw).
If it is difficult to insert by probing, look from the side while you insert it into the bearings of the
bottom plate.
SM
2-131
D146/D147/D148/D149/D150
Punch Unit PU3040