202.05 Sensor (Fuser Exit) Lag Jam - Lexmark X95x Series Service Manual

7558-xxx

202.04/202.05 Sensor (fuser exit) lag jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (fuser exit) for
2
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch PRINTER SENSOR
TESTS.
4. Touch Sensor (fuser exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (fuser exit) for
3
proper connection.
Is the above component
properly connected?
Check the upper redrive motor.
4
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Upper redrive motor
(forward).
5. Touch Upper redrive motor
(reverse).
Does the above component
operate properly?
Check the upper redrive motor for
5
proper connection.
Is the above component
properly connected?
Service Manual
2-108
Yes
Go to step 2.
Go to step 2.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page 4-87.
Go to step 6.
Replace the upper redrive
assembly.
Go to
"Upper redrive assembly
removal" on page 4-192.
No
Remove any media or media
fragments.
Replace the fuser assembly.
Go to
"Fuser assembly
removal" on page 4-87.
Replace the connections.
Go to step 5.
Replace the connections.
Previous
Next
Go Back