Appendix D. Setting Up The System Rack - IBM pSeries 630 6C4 Service Manual

Appendix D. Setting Up the System Rack

Before setting up a rack, review the following specifications and clearance information. Then go to "Model
6C4 Rack Installation Inventory" on page 563.
Rack Specifications
This section contains specifications for the system rack.
7014 Model T00 and T42 Rack
The mechanical packaging, cooling, power supply, and environmental specifications for the rack are shown
in the following table:
Dimensions
Height
Capacity
With PDP - DC only
Width without side panels
With side panels
Depth with rear door
RS/6000 T00 with both doors
pSeries T00 with both doors
Weight
Base Rack
Full Rack
Electrical²
(sum specified values for drawers or enclosures in rack)
AC Rack Power source loading maximum in
kVA (per PDB)⁴
Voltage range (V ac)
Frequency (hertz)
Temperature Requirements
(see specifications for drawers or enclosures)
This table continues on the following page.
1804 mm 71.0 in.
36 EIA Units
1926 mm 75.8 in.
623 mm 24.5 in.
644 mm 25.4 in.
1042 mm 41.0 in.
1098 mm 43.3 in.
1147 mm 45.2 in.
244 kg 535 lbs
816 kg 1795 lbs.
4.8
200 to 240
50 or 60
561