IBM pSeries 630 6C4 Service Manual page 260

Table 4. Firmware Error Codes. (continued)
Error Code Description
21F2 0001 SCSI read/write optical - test unit ready failed -
hardware error
21F2 0002 SCSI read/write optical - test unit ready failed -
sense data available
21F2 0003 SCSI read/write optical - send diagnostic failed-
sense data available
21F2 0004 SCSI read/write optical - send diagnostic failed-
DevOfl cmd
2200 0001 PCI Ethernet BNC/RJ-45 or PCI Ethernet
AUI/RJ-45 adapter
internal wrap test failure
2200 1001 10/100 Mbps Ethernet PCI Adapter
internal wrap test failure
2200 1002 10/100 Mbps Ethernet PCI adapter failure
2201 0001 PCI Auto LANstreamer token ring adapter failed
to complete hardware initialization.
2201 1001 PCI token ring adapter failed to complete
hardware initialization.
25A0 0001 Cache L2 controller failure
25A1 0001 Cache L2 SRAM failure
240 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Action/
Possible Failing FRU
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the SCSI device.
2. Replace the SCSI cable.
3. Replace the SCSI controller.
Before replacing any system components, refer
to the notes in error code 21A0 0001.
1. Replace the media.
2. Replace the SCSI device.
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
Replace the adapter.
See "Checkpoint and Error Code Index" on
page 213 for location code information related
to this error. Also see "Replacing the Network
Adapter" on page 211.
Replace the adapter.
See "Checkpoint and Error Code Index" on
page 213 for location code information related
to this error. Also see "Replacing the Network
Adapter" on page 211.
Replace the adapter.
See "Checkpoint and Error Code Index" on
page 213 for location code information related
to this error. Also see "Replacing the Network
Adapter" on page 211.
Replace the adapter.
See "Checkpoint and Error Code Index" on
page 213 for location code information related
to this error. Also see "Replacing the Network
Adapter" on page 211.
Replace the adapter.
See "Checkpoint and Error Code Index" on
page 213 for location code information related
to this error. Also see "Replacing the Network
Adapter" on page 211.
1. Replace the processor card.
Location: U0.1-P1-C1
2. Replace the CEC backplane assembly.
Location: U0.1-P1.
1. Replace the processor card.
Location: U0.1-P1-C1