Examples For Using The Generic Sample Modem Configuration Files; Customizing The Modem Configuration Files - IBM pSeries 630 6C4 Service Manual

Examples for Using the Generic Sample Modem Configuration Files

The following table contains information to help you determine which modem configuration file to use with
various modems.
Modem
AT&T DataPort 2001
(Ring interrupt only on first
ring)
Bocamodem 1440E
Hayes Smart Modem 300
IBM 5841
IBM 5843
IBM 7851
IBM 7852-10
IBM 7855
USRobotics
36.6K Sportster
Zoom V.32

Customizing the Modem Configuration Files

You can create your own modem configuration files or modify the samples provided. After you customize
your modem configuration files, you must access them through the Configure Remote Maintenance Policy
Service Aid rather than from the service processor menus.
Note: If you have already set up your serial ports, line speeds, authorizations, and telephone numbers
from the service processor menus, use the service aid to specify your customized modem
configuration files.
If you have not already set up your serial ports, line speeds, authorizations, and telephone numbers
from the service processor menus, use the service aids to set them while you specify your
customized modem configuration files.
To disable Auto-Reliable Mode testing of the remote modem, use the sample modem configuration file
/usr/share/modems/modem_f.cfg as a model that you can modify, as follows:
1. Find the necessary command in your modem manual.
2. Copy the /usr/share/modems/modem_f.cfg file to a new file with a different name (for example,
modem_fx.cfg).
3. In the new file (modem_fx.cfg), change the line Send "ATE0T\r" to Send "ATcccE0T\r" where ccc is
the added command as specified in your modem manual, as follows:
Change the third line of each of the following stanzas:
v condout
v condin
v ripo
4. Save the changes.
Setup Z Setup Z0
(Rare)
X
X
X
Setup F Setup F0
X
X
X
X
X
Appendix F. Modem Configurations
Setup F1
X
X
599