IBM pSeries 630 6C4 Service Manual page 347

Hide thumbs Also See for pSeries 630 6C4:
Table of Contents

Advertisement

Table 5. Service Processor Error Codes. (continued)
Error Code Description
4609 28C4 CEC backplane fault
460A 287A CEC backplane
460A 28C4 CEC backplane fault
460B 287A CEC backplane
460B 28C4 CEC backplane fault
460C 287A CEC backplane
460C 28C4 CEC backplane fault
460D 287A CEC backplane
460D 28C4 CEC backplane fault
460E 287A CEC backplane
460E 28C4 CEC backplane fault
460F 287A CEC backplane
460F 28C4 CEC backplane fault
4B23 26F6 Description: 1-way processor card fault
Action: This error code indicates that the processor repeat gard function has deconfigured a
processor. Do the following:
1. Go to the processor configuration/deconfiguration menu, located under the system information
menu in the service processor menus.
Look at the status of the processors. If any of the processors have a status of manually
deconfigured, reconfigure the processor(s) and boot the system to the SMS menus. Power
down the system using the white power button and look again at the status of the processors. If
all of the processors are still configured in the processor configuration/deconfiguration menu,
the problem has been resolved.
If any of the processors have a status of deconfigured by the system, either before or after the
boot to the SMS menus, go to step 2.
2. Replace the processor card (on which the deconfigured processor resides) specified by the
location code.
Action/
Possible Failing FRU
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Replace the CEC backplane,
Location: U0.1-P1
Chapter 5. Error Code to FRU Index
327

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pseries 630 6e4

Table of Contents