IBM pSeries 630 6C4 Service Manual page 474

10. From the menu, select the adapter you are removing.
11. Use the tab key to answer YES to Keep Definition and YES to set Unconfigure Child Devices.
Press Enter.
12. The ARE YOU SURE screen displays. Press Enter to verify the information. Successful
unconfiguration is indicated by the OK message displayed next to the Command field at the top of the
screen.
13. Press F3 to return to the PCI Hot-Plug Manager menu.
14. Select List PCI Hot-Plug Slots and press Enter.
15. If the List PCI Hot-Plug Slots menu indicates that the slot is not empty, go to substep 17. If the List
PCI Hot-Plug Slots menu indicates that the slot is empty, do the following:
a. Select F3 to cancel.
b. Select Add PCI Hot-Plug Adapter, and press Enter. The display screen indicates that the PCI
slot is empty.
c. On the display screen, select the indicated empty slot. Look at the adapter you intend to replace
or reseat. A slow blinking amber LED located on the PCI riser card is indicating that the slot has
been identified. Press Enter. The adapter is now in the action state.
d. Completely remove the hot-plug adapter from the slot. The LED goes off.
e. Reinstall the adapter, ensuring that it is correctly seated. Press Enter.
f. Select F3 to return to the PCI Hot-Plug Adapter Menu.
g. Select Install/Configure Devices Added after IPL.
h. Select F3 to return to the PCI Hot-Plug Adapter Menu.
i. Connect the appropriate cables and devices to the adapter.
j. Select List PCI Hot-Plug Slots, and press Enter.
k. Return to the error code or procedure that sent you here, if the List PCI Hot-Plug Slots menu
indicates that the slot for the just replaced or reseated adapter is empty.
16. Select F3 to cancel.
17. Select Replace/Remove a PCI Hot-Plug Adapter and press Enter. The Replace/Remove a PCI
Hot-Plug Adapter menu displays.
18. Move the cursor to select the adapter that you are removing, and press Enter.
19. Press the Tab key until the entry field displays the replace operation, and then press Enter. Follow the
instructions that display on the screen until you are instructed to remove the adapter.
20. When you are instructed to remove the adapter from the adapter slot, disconnect any cables that are
connected to the adapter being removed.
454 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide