IBM pSeries 630 6C4 Service Manual page 216
Hide thumbs
Also See for pSeries 630 6C4:
- Installation manual (180 pages) ,
- Quick setup instructions manual (13 pages) ,
- User manual (233 pages)
Table of Contents
Advertisement
Checkpoint
E58D
E58E
E58F
E590
196
Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Description
Set up EADS function registers
Set up EADS function registers
Set up EADS function registers
Set up EADS function registers
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
Advertisement
Chapters
Table of Contents
