Restore Default Settings - IBM pSeries 630 6C4 Service Manual

Restore Default Settings

This option restores the boot list to the default boot list. The default boot list will vary depending on the
devices that are installed in the system.
The default boot list is as follows:
1. Primary diskette drive (if installed)
2. CD-ROM drive (if installed)
3. Tape drive (if installed)
4. Hard disk drive (if installed)
5. Network adapter
Multiboot Startup
Multiboot Startup toggles the multiboot startup flag, which controls whether the multiboot menu is invoked
automatically on startup.
Exiting System Management Services
After you have finished using the system management services, type x (for exit) to boot your system or
partition.
419
Chapter 8. Using System Management Services