Multiple Fru Callout Instructions - IBM pSeries 630 6C4 Service Manual

v Pluggable PCI adapters:
Note: The number of PCI-X slots available is dependent on the number of slots your PCI riser card has
available. Your system can be configured with either a four or six slotted PCI riser card.
20-58 to 20-5F
20-60 to 20-67
10-68 to 10-6F
10-70 to 10-77
10-78 to 10-7F
10-80 to 10-87
v Integrated ISA adapters:
01-D1
01-R1
01-S1
01-S2
01-S3
01-K1
v Device attached to SCSI controller:
10-60-00-4,0

Multiple FRU Callout Instructions

If an eight-digit error code appears in the operator panel display or in Chapter 5, "Error Code to FRU
Index", on page 209, a location code for a failing part might also be specified. If the location code includes
a blank space followed by a lowercase x followed by a number, this is an error code with multiple FRU
callouts. This error can typically happen with memory DIMMs or processors, and might involve mixed
types of parts. In this case, check the system's configuration for FRU part numbers to determine the
appropriate set of FRUs.
To determine the FRU part numbers of the electronic assemblies in the entire system, use the service
processor menus. From the General User menu, select Read VPD Image from Last System Boot, then
enter 90 to display detailed Vital Product Data (VPD).
To determine the FRU part numbers of the electronic assemblies in a partition by using the lscfg -vp | pg
command on the AIX command line to display the detailed VPD of all assemblies. The FRU part number
information for processors and memory DIMMs might be located at the bottom of the command output.
26 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Any PCI card in slot 1
Any PCI card in slot 2
Any PCI card in slot 3
Any PCI card in slot 4
Any PCI card in slot 5
Any PCI card in slot 6
Diskette adapter
Parallel port adapter
Serial port 1 adapter
Serial port 2 adapter
Serial port 3 adapter
Keyboard adapter
Device attached to integrated SCSI Port 1