IBM pSeries 630 6C4 Service Manual page 334

Table 5. Service Processor Error Codes. (continued)
Error Code Description
4503 302E Description: 2 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has deconfigured a quad of
memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the system information
menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of manually deconfigured,
reconfigure the DIMMs and boot the system to the SMS menus. Power off the system using the
white power button and look again at the status of the DIMMs. If all of the processors are still
configured in the processor configuration/deconfiguration menu, the problem has been resolved.
If all of the DIMMs are still configured in the memory configuration/deconfiguration menu, the
problem has been resolved.
If any of the DIMMs have a status of deconfigured by the system, either before or after the boot
to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location code. The entire
quad of memory must be replaced.
4504 309B 256 MB DIMM fault
4504 309C 256 MB DIMM fault
4504 309D 512 MB DIMM fault
4504 309E 1 GB DIMM fault
4504 309F 1 GB DIMM fault
4504 30AA 2 GB DIMM fault
4505 26F6 1-way processor card fault
4505 26F7 2-way processor card fault
4505 26F8 1-way processor card fault
4505 26FA 2-way processor card fault
4505 26FB 2-way processor card fault
4505 26FD 1-way processor card fault
4505 26FE 2-way processor card fault
4505 26FF 1-way processor card fault
4505 301A 128 MB DIMM fault
4505 301B 1 GB DIMM fault
314 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Action/
Possible Failing FRU
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Replace the processor card specified by the
location code.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.
Go to "MAP 1240: Memory Problem Resolution"
on page 73.