IBM pSeries 630 6C4 Service Manual page 189

Hide thumbs Also See for pSeries 630 6C4:
Table of Contents

Advertisement

Checkpoint
E140
E145
E149
E14C
E14D
E150
E151
E152
E153
E154
E155
E156
E158
E15B
E15F
E170
E172
Description
Operating system load
Early debug code activated; firmware is
halted
Create boot mgr node
Create terminal-emulator node
Loading boot image
Create host (primary) PCI controller node
Probing primary PCI bus
Probing for adapter FCODE, evaluate if
present
End adapter FCODE, probe/evaluate
Create PCI bridge node
Probing PCI bridge secondary bus
Create PCI Ethernet node
System firmware waiting for a virtual
terminal to be opened on an HMC for SMS
menus to be displayed.
Transferring control to operating system
(service mode boot)
Adapter VPD probe
Start of PCI Bus Probe
First pass of PCI device probe
Action/
Possible Failing FRU
See "Boot Problems/Concerns" on
page 204.
Press the g key on the serial interface.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
See "Boot Problems/Concerns" on
page 204.
If a location code is specified, replace the
adapter at that location code.
If no location code is specified, go to "MAP
1542: I/O Problem Isolation" on page 127.
If a location code is specified, replace the
adapter at that location code. If replacing
the adapter does not resolve the problem,
replace the I/O backplane in which the
adapter is plugged.
If no location code is specified, go to "MAP
1542: I/O Problem Isolation" on page 127.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
If a location code is specified, replace the
adapter at that location code. If no location
code is specified, go to "MAP 1542: I/O
Problem Isolation" on page 127.
Open a virtual terminal window on the
HMC.
See "Boot Problems/Concerns" on
page 204.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Follow the repair action listed for
checkpoint E151.
Chapter 4. Checkpoints
169

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pseries 630 6e4

Table of Contents