IBM pSeries 630 6C4 Service Manual page 220

Checkpoint
E600
E601
E602
E603
E604
E605
E60E
E60F
E6FF
E700
E701
E702
E703
E704
E705
E706
E707
E708
E709
E70A
E70B
200 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Description
SSA PCI adapter open firmware has run
successfully.
SSA PCI adapter BIST has started but
failed to complete after 4 seconds.
SSA PCI open firmware has started.
SSA PCI adapter BIST has completed with
an error.
SSA PCI adapter BIST and subsequent
POSTs have completed successfully.
SSA PCI adapter BIST has completed
successfully but subsequent POSTS have
failed.
SSA PCI open firmware about to exit (no
stack corruption).
SSA PCI open firmware has run
unsuccessfully.
SSA PCI open firmware about to exit (with
stack corruption).
Create system firmware VPD
Create memory VPD.
Create processor card VPD.
Create operator panel VPD.
Create CEC VPD.
Create VPD.
Create VPD.
Create system VPD.
Create VPD.
Create VPD via SPCN.
Create service processor VPD.
Create L3 module VPD
Action/
Possible Failing FRU
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
System firmware may be corrupted.
Reinstall system firmware.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call for support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 124.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call for support.
1. Check for system firmware updates.
2. Call service support.