IBM pSeries 630 6C4 Service Manual page 215
Hide thumbs
Also See for pSeries 630 6C4:
- Installation manual (180 pages) ,
- Quick setup instructions manual (13 pages) ,
- User manual (233 pages)
Table of Contents
Advertisement
Checkpoint
E589
E58A
E58B
E58C
Description
Set up EADS function registers
Set up EADS function registers
Set up EADS function registers
Set up EADS function registers
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
3. Replace the I/O subsystem backplane
specified by the location code.
4. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
1. Check for system firmware updates.
2. Replace the I/O subsystem's RIO riser
card (location: U0.dd-P1.1) specified by
the location code.
3. If the location code associated with this
checkpoint specifies a PCI adapter
card, replace the adapter card.
4. Replace the I/O subsystem backplane
specified by the location code.
5. Go to "MAP 1542: I/O Problem
Isolation" on page 127.
Chapter 4. Checkpoints
195
Advertisement
Chapters
Table of Contents
