IBM pSeries 630 6C4 Service Manual page 360

Hide thumbs Also See for pSeries 630 6C4:
Table of Contents

Advertisement

Error Code Description
B1xx 4643 I2C card/flex cable detection error
B1xx 4644 Processor VPD system fault
B1xx 4645 I2C (Non-processor) VPD System Fault
B1xx 4646 General VPD fault
B1xx 4647 Write TM field in system VPD
B1xx 4648 CPU Backplane VPD or Power Source
B1xx 4649 Power supply VPD failure
B1xx 4650 A system processor failure has been detected by
the service processor. All system processors
have been reset in an attempt to recover
operations.
B1xx 4651 CPU VPD fault
B1xx 4660 Memory subsystem failure
B1xx 4661 Memory card VPD failure
B1xx 4662 Memory DIMM VPD failure
340
Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide
Action/
Possible Failing FRU
1. If the error code is B135 4643, it indicates a
PCI riser card detection error. Do the
following:
a. Verify that the PCI riser card (location:
U0.1-P2) is properly seated in the system
backplane.
b. Replace the PCI riser card, location:
U0.1-P2.
c. Replace the system backplane, location:
U0.1-P1.
2. For all other values of xx in B1xx 4643, go to
"MAP 1540: Problem Isolation Procedures"
on page 124.
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.
Replace the operator panel, location: U0.1-L1.
Do not swap the VPD module from the old
operator panel onto the new operator panel;
leave the new, unprogrammed VPD module on
the new operator panel. Call service support for
instructions.
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.
CEC power supply
Location: U0.1-V1, U0.1-V2
Information only. If the problem persists, check
the error logs for other fault indications.
If no other fault indications are found, go to
"MAP 1540: Problem Isolation Procedures" on
page 124.
Processor card
Location: U0.1-P1-C1, U0.1-P1-C2
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.
Go to "MAP 1540: Problem Isolation Procedures"
on page 124.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pseries 630 6e4

Table of Contents