IBM pSeries 630 6C4 Service Manual page 152

Step 1542-11
1. If it is not already off, turn off the power.
2. Remove all adapters from slots 1, 2, 3, 4, 5, 6, and 7 (location codes Ux.y-P1-I1 through I7) from the
I/O drawer.
3. Label and record the location of any cables attached to the adapters.
4. Record the slot number of the adapters.
5. Turn on the power to boot standalone diagnostics from CD.
6. If the TTY screen displays, enter 0 to select this console, press the 0 key on the TTY terminal's
keyboard.
7. If the Please define the System Console screen is displayed, follow directions to select the system
console.
8. Use the Display Configuration and Resource List to list all attached devices and adapters (refer to the
RS/6000 Eserver pSeries Diagnostic Information for Multiple Bus Systems, order number SA38-0509,
if necessary).
9. Check that all attached devices and adapters are listed.
Did the Please define the System Console screen display and are all attached devices and adapters
listed?
NO Go to "Step 1542-10" on page 131.
YES Go to "Step 1542-13" on page 133.
Step 1542-12
1. If it is not already off, turn off the power.
2. Remove all adapters from slots 1, 2, 3, 4, 5, 6, and 7 (location codes Ux.y-P1-I1 through I7) from the
I/O drawer.
3. Label and record the location of any cables attached to the adapters.
4. Record the slot number of the adapters.
5. Turn on the power to boot standalone diagnostics from CD.
6. If the TTY screen displays Enter 0 to select this console, press the 0 key on the TTY terminal's
keyboard.
7. If the Please define the System Console screen is displayed, follow directions to select the system
console.
8. Use the Display Configuration and Resource List to list all attached devices and adapters (refer to the
RS/6000 Eserver pSeries Diagnostic Information for Multiple Bus Systems, order number SA38-0509,
if necessary)
9. Check that all attached devices and adapters are listed.
Did the Please define the System Console screen display and are all attached devices and adapters
listed?
NO Go to "Step 1542-15" on page 134.
YES Go to "Step 1542-13" on page 133.
132 Eserver pSeries 630 Model 6C4 and Model 6E4 Service Guide