Figure 63: Normal Operation Indication; Figure 64: Main Screen Results - Gamatronic POWER+ User Manual

If instead of the STSW status being "OK, INV" it continues to be "OK, BYP", check the Static Switch panel
to verify that the inverter is running.
If the inverter indicator on the Static Switch panel is OFF:
•
Press the Inv/Byp button on the static switch panel to switch the inverter ON and wait for
the indicator to light.
•
Press the Inv/Byp button on the lower right of the control panel.
2. Connect the load and observe the results on the display.
L1:
L2:
L3:
3. Observe that the "dot" bar graph now indicates the load presence and relative power consumption.
Filled dots indicate kW; filled dots plus empty dots indicate apparent power in kVA.
52
G
AMATRONIC

Figure 63: Normal operation indication

Load level Output
bar graph current
LOAD LEVEL
_____ 015A, 230V
______ 012A, 230V
_______ 011A, 230V

Figure 64: Main screen results

POWER + start-up is now complete.
E I L
LECTRONIC NDUSTRIES TD
Output Current
voltage time
---11:20:25---
BATTERY:
UPS OK
STSW OK
POWER +
.
Battery
864V
voltage
(ON)
Status
(INV)
indications
UPS,
PARALLEL USER GUIDE
, . 2.0
REL