G
E
I
L
.
AMATRONIC
LECTRONIC
NDUSTRIES
TD
8.3.7
"Configuration" main menu option
Choosing the "Configuration" option on the Web interface's main menu displays the Configuration (sub)
menu. Through this menu, various important UPS settings can be modified. The options in the
Configuration menu are described below.
Figure 296: Configuration menu
Selecting any of the options in the Configuration menu causes the Web interface to prompt for a user-ID
and password. The factory default user-ID is admin, and the factory-default password is also admin. These
default values for the user-ID and password can be changed, as is explained below in section 8.3.7.3 on
page 143.
After entering the correct user-ID and password and then pressing Enter, the requested screen is displayed.
The user-ID and password are only requested once per session, on the first entry into any of the
Configuration menu options.
Warning: When an IP address or addresses are specified for a given community, only the specified
addresses have access to the community. All other users will be shut out from the defined
community.
POWER +
141
UPS,
,
. 2.0
PARALLEL
USER GUIDE
REL