Status Indicators; Figure 30: Status Indicators; Table 5: Status Indicators - Gamatronic POWER+ User Manual

4.6

Status indicators

The status indicators show precisely what is running and how the UPS is providing power to the load.
The diagram below shows the power source and destination routes in use for each of the three automated
operation modes.
Normal
operation
route
Ac Line Green – Shows that the ac input is present and within range
Red – Flashes to indicate general alarm condition
Alarm
Green – Shows that the battery is in discharge mode
Battery
Bypass Green – Shows that the load is supplied from the ac input
Green - Shows that the inverter is supplying power to the load
Inverter
Blinking Red – Shows that a battery test is in progress
Bat. Test
Steady Red – Battery test failure
Green – Indicates that the UPS is running
UPS On
Load Green – Indicates that ac voltage is available at the output
36
G E I
AMATRONIC LECTRONIC NDUSTRIES

Figure 30: Status indicators

Table 5: Status indicators

L .
TD
Bypass
operation
route
Battery
operation
POWER +
UPS,
PARALLEL
route
, . 2.0
USER GUIDE REL