Table 5: Status indicators ...........................................................................................................................36
Table 6: Operation buttons .........................................................................................................................37
Table 8: Main Menu Options.......................................................................................................................61
Table 9: Log Messages ..............................................................................................................................71
Table 12: Main Menu options ...................................................................................................................134
Table 20: Specifications ............................................................................................................................158
This manual contains diagrams that include images of the LCD display screen of the UPS. Unless
otherwise indicated, the readings shown in the screen images are representational only, and are not
intended to match the readings on a specific system in a particular environment.
In this User Guide the electrical phases of a three-phase ac power line may be referred to either as R, S,
and T or as L1, L2, and L3.
IN THE EVENT THAT SYSTEM OUTPUT CAPACITY IS INCREASED ABOVE THE
ORIGINAL FACTORY CONFIGURATION, THE SYSTEM NAMEPLATE MUST BE
UPDATED TO INDICATE THE NEW POWER AND CURRENT CAPACITY.
This condition applies when new, non-redundant power modules are added to the
system or when formerly redundant modules are designated as non-redundant.
xii
G
E
AMATRONIC
LECTRONIC
L
IST OF
S
TANDARDS AND
I
L
.
NDUSTRIES
TD
T
ABLES
C
ONVENTIONS
POWER +
UPS,
,
PARALLEL
USER GUIDE
. 2.0
REL