Set User Name And Password; Figure 299: Changing Username And Password Of The Web Interface - Gamatronic POWER+ User Manual

8.3.7.3

Set user name and password

The "Set user name and password" on the Configuration submenu enables you to change the user-ID and
password used for entry into the options on the Web interface's Configuration submenu.
The factory default user-ID and password are admin and admin. The new user-ID and password must
each have a minimum of four characters and up to a maximum of nine characters. If entered, the new user-
ID and password are effective immediately.
Click the Back button to return to the Configuration submenu.

Figure 299: Changing username and password of the Web interface

POWER +
UPS,
PARALLEL USER GUIDE
G E
AMATRONIC LECTRONIC
, . 2.0
REL
I L .
NDUSTRIES TD
143