Introduction To The Power + Ups System; Power + Has Many Unique Features - Gamatronic POWER+ User Manual

1. I
NTRODUCTION TO THE
Thank you for purchasing a POWER + UPS system. POWER + is the most sophisticated UPS on the
market today.
In general, an Uninterruptible Power Supply (UPS) provides backup power for use when the utility ac
electric power mains fail or drop to an unacceptable voltage level. A POWER + UPS does a whole lot
more.
POWER + is designed to protect your data and equipment and minimize downtime and other adverse
effects normally incurred by power irregularities and failures.
POWER + continually eliminates surges, spikes and sags that are inherent in commercial utility power.
Over time, these irregularities shorten the life of equipment and components. The efficiency of POWER +
thus helps to extend the life of your equipment, even through normal use when the input power system is
constant and continuous.
POWER + requires very little attention or inter
and understand the procedures described in this manual to ensure trouble-free operation.
POWER + is a parallel redundant UPS and is flexible in structure, allowing it to be easily extended by
adding modules as required. The UPS modules are designed for hot swapping, making many different
configurations possible.

POWER + has many unique features:

POWER+ is:
•
Reliable, thanks to its N+ 1 parallel redundancy.
•
Both flexible and modular; it may include from one to ten modules.
•
A true on-line battery design according to IEC62040-3.
•
A "green" power solution thanks to a THD of 5 % at the input, and provides "clean"
power to your loads.
•
A UPS that employs active current sharing at the input / output.
•
A UPS that has an overall efficiency of up to 96 % and a backup efficiency of 98 %.
•
Light and small, a 10-kVA module weighs approximately 10 Kg (22 lb.).
POWER +
UPS,
PARALLEL USER GUIDE
G E
AMATRONIC LECTRONIC
P
ention during normal operation; however, you should read
v
, . 2.0
REL
I L .
NDUSTRIES TD
+ UPS
OWER SYSTEM
1