Set Date And Time And Serial Number; Define The Ip Address Of The Power; Figure 48: Date And Time; Figure 49: Site Number - Gamatronic POWER+ User Manual

4.10.3

Set Date and Time and Serial Number

To verify the date and time set in the system controller and make sure that they are correct:
1. Use the and
modify, then use the
[Main Menu > SETUP > (password) > Time]
Set real time
Year
2011
2. Enter the serial number of the Power+ system in the system controller, and then press Ent:
[Main Menu > SETUP > (password) > Site]
Site number: 013271
Note: The serial number of Power+ is on a bar-code label at the bottom of the unit, on the left hand side.
4.10.4

Define the IP Address of the Power+

This procedure assigns the Power+ an address within the domain of the customer's computer network.
1. Obtain IP, gateway, and mask addresses from the system administrator of the organization for the
Power+ system.
2. Select Set IP ADDRESS in the Network menu:
[Main Menu > SETUP > (password) > Ent > Service > SC2012 > Network]
1> Set IP ADDRESS
2> Set GATEWAY
3> Set MASK
4> Store
44
G
AMATRONIC
keys to select the year, month, day, hour, minute, or second you wish to
and keys to set the correct value for the selected item. Press Ent:
Month Day
09 30

Figure 48: Date and time

Figure 49: Site number

5> SNMP factor

Figure 50: Network menu

E I L
LECTRONIC NDUSTRIES TD
Hour Min Sec
23 58 00
157.211.000.253
157.211.000.251
255.255.255.000
Select:1
.
POWER +
UPS,
PARALLEL USER GUIDE
, . 2.0
REL