4. U
SER INTERFACE
This section describes the buttons and indicators used to operate the POWER + .
4.1
Control panel
The POWER + Control Panel, located on the front of the controller, provides the user with an interface to the
POWER + system. It includes an LCD display, a keypad, buttons and indicators for monitoring and
controlling the UPS configuration and functions. The control panel is aimed at both the end-user as well as
the service engineer. All of the POWER + parameters can be viewed on the control panel.
Use of the POWER + Control Panel is described in detail in Chapter 6 beginning on page 55.
4.2
UPS module panel
The UPS module panel, located on the front of each UPS module, provides the user with the status of that
module.
32
G
E
I
AMATRONIC
LECTRONIC
NDUSTRIES
Figure 25: Control panel
Figure 26: UPS module panel
L
.
TD
POWER +
UPS,
PARALLEL
,
. 2.0
USER GUIDE
REL