Control" Main Menu Option; Figure 294: The "Control" Main Menu Option Screen; Table 15: Commands Available On The "Control" Screen - Gamatronic POWER+ User Manual

8.3.5

"Control" main menu option

The "Control" main menu option enables the user to initiate any of a number of UPS processes. The
commands available are described in Table 15 below.
M
ENU OPTION
Load on bypass
Load on inverter
Start battery test
Abort battery test
LED test
Shutdown
Startup
Restart
POWER +
UPS,
PARALLEL USER GUIDE
G E
AMATRONIC

Figure 294: The "Control" main menu option screen

Table 15: Commands available on the "Control" screen

D
ESCRIPTION
Transfers the load to the bypass voltage.
Transfers the load to the inverter.
Initiates a battery test. Note: it is recommended that a battery test not be initiated
when the when the UPS is operating near 100 % capacity and at the same time
the battery is known to be not fully charged or not connected or otherwise faulty.
Stop a battery test immediately.
The UPS beeps briefly and all of the LEDs on the control panel light up, to reveal
any faulty LEDs.
Shuts down the Power+. Power will continue to be available to the loads from the
bypass voltage.
Starts up the Power+ when it is in an "OFF" condition.
When the Power+ is "ON", this command initiates a shutdown of the Power+
followed by a startup.
, . 2.0
REL
I L .
LECTRONIC NDUSTRIES TD
139