Configuring The Ups; Number Of Redundant Upss; Figure 218: Set Upss; Figure 219: Service Menu - Gamatronic POWER+ User Manual

Press ▲ slowly to test each relay, and press Esc when finished:
2.
[Main Menu > SETUP > (password) > Ent > Service > DryOut Test]
Relay status:
Press 'UP' and repeat for relay test(04)
123456
7.12.3

Configuring the UPS

1. Select Configure:
[Main Menu > SETUP > (password) > Ent > Service]
1> ------
2> UPSs
3> ------- 6> En/Dis shar 9> SC2012..
Select, then Enter
7.12.3.1

Number of Redundant UPSs

1. Select # OF UPSs (redundancy):
[Main Menu > SETUP > (password) > Ent > Service > Configure]
1> # OF UPSs (redundancy) 5> Dry, Alarms
2> # OF UPSs (total)
3> # OF BATT
4> Static Switch Setup
2. Use the arrow keys to set the number of redundant UPSs and then press Ent:
[Main Menu > SETUP > (password) > Ent > Service > Configure > # OF UPSs (redundancy)]
Set number of UPSs (Redundancy)
POWER +
UPS,
PARALLEL USER GUIDE
G E
AMATRONIC LECTRONIC

Figure 218: Set UPSs

4> DryOut Test 7> --------
5> Configure

Figure 219: Service menu

7> Parallel/StandAlone
Figure 220: Service > Configure menu
01 (04 total)

Figure 221: Set number of redundant UPSs

, . 2.0
REL
I L .
NDUSTRIES TD
Contacts 1-6
=ON, =OFF
8> Powr.Calib
6> Calibration
8> REM COMMAND
111