Setting Up The Dry Alarms; Figure 230: Service > Configure Menu; Figure 231: Dry Relay Menu; Figure 232: Set Dry Contact N Alarm Associations - Gamatronic POWER+ User Manual

7.12.3.5

Setting up the Dry Alarms

1. Select Dry, Alarms:
[Main Menu > SETUP > (password) > Ent > Service > Configure]
1> # OF UPSs (redundancy) 5> Dry, Alarms
2> # OF UPSs (total)
3> # OF BATT
4> Static Switch Setup
2. Select DryN Association:
[Main Menu > SETUP > (password) > Ent > Service > Configure > DRY, Alarms]
1> dry1 association
2> dry2 association
3> dry3 association
7> enable / disable alarms
3. Use arrow keys to set associations between dry contacts and alarms, and then press Ent:
[Main Menu > SETUP > (password) > Ent > Service > Configure > DRY, Alarms > dry1
association]
Associate dry contact #01
0 0
1...5....0....5....0....5....0.2
--------------------------------
4. Use arrow keys to enable or disable alarms, and then press Ent:
[Main Menu > SETUP > (password) > Ent > Service > Configure > DRY, Alarms > enable / disable
alarms]
ENABLE
0 0
1...5....0....5....0....5....0.2
--------------------------------
114
G E
AMATRONIC
7> Parallel/StandAlone
Figure 230: Service > Configure menu
4> dry4 association
5> dry5 association
6> dry6 association

Figure 231: Dry relay menu

1 1 2

Figure 232: Set dry contact N alarm associations

OR DISABLE
1 1 2

Figure 233: Enable / disable alarms

I L .
LECTRONIC NDUSTRIES TD
6> Calibration
8> REM COMMAND
with alarm/s
2 3 3 0=del
1=add
alm#01
ALARMS/s
2 3 3 0- Dis
1-Ena
ALM#01
POWER +
UPS, ,
PARALLEL USER GUIDE
. 2.0
REL