Use
6.11.5 Power legrests
CAUTION
Incorrect use of the power legrests
Falling, tipping over due to user error
► Drive in street traffic only with the legrests lowered.
INFORMATION
► Also observe the safety instructions in the section "Power seat functions" (see Page 55).
► Observe the instructions for use in the sections "Controlling power seat functions" (see Page 58) and "Joy
stick functions" (see Page 59).
46
47
6.11.6 Controlling power seat functions
INFORMATION
If your power wheelchair is equipped with an LCD monitor, please also read the section "Separate LCD monitor"
(see Page 63).
6.11.6.1 VR2 control unit
•
Power seat functions are activated and controlled via the control panel (see Page 23 et seq.).
•
The driving function is not available during the activation of a seat function, and the [Selected speed level] LED
display turns off.
•
A seat function is activated by pressing the [Select additional power options] button. This button toggles
through the functions in the order 'Seat function 1' > 'Seat function 2' > 'No seat function'.
•
The LED display for the activated seat function lights up when that function is activated. The driving function is
not available at this time, and the [Selected speed level] LED display turns off.
•
Once a seat function is selected, it is operated by moving the joystick forward or backward.
58
The legrests prevent a constant pressure load or
provide anti-shock support.
The legrests can be operated individually or at the same
time, depending on the configuration.
The footrests can be flipped up to increase the entry
and exit area.
In addition, the electrically adjustable legrests can be
lifted up and out of their brackets (item 1).
Juvo