Combined Seat Height Adjustment/Seat Tilt; Power Back Angle Adjustment; Controlling Power Seat Functions - Otto Bock Skippi Instructions For Use Manual

22

7.13.5 Combined seat height adjustment/seat tilt

This function allows the seat to be tilted while continuously raising the seat surface at the same time.
For further information on the functions and relevant safety information, see the preceding section.

7.13.6 Power back angle adjustment

WARNING
Incorrect use of back angle adjustment
Falling, tipping over due to driving with unallowable seat settings
► Drive in street traffic only with a vertical backrest.
► When driving with the back angle adjustment activated, even at home, fasten the belts and do not lean out
beyond the seat surface.
INFORMATION
► Please also observe the generally applicable safety instructions in the section "Power seat functions" >
"Safety instructions" (see page 32).
► Observe the instructions for use in the sections "Controlling power seat functions" (see page 35) and "Joy­
stick functions" (see page 36).
23

7.13.7 Controlling power seat functions

• Power seat functions are activated and controlled via the control panel (see page 18 ff.).
• Depending on the equipment, pressing the [Select power seat function] button activates the following seat
function:
– Left button: [Seat function 1]: Power seat tilt
– Right button: [Seat function 2]: Power seat height adjustment or power back support angle adjustment
INFORMATION: Power wheelchair equipped with three power seat functions: See below
• The LED display for the activated seat function lights up when the respective [Seat function 1]/[Seat function 2]
button is activated. The driving function is not available at this time, and the [Selected speed level] LED display
turns off.
• Once a seat function is activated, it is extended or retracted by moving the joystick forward or backward.
Skippi
The power seat tilt allows the seat to be tilted up to 20°,
for example to relieve pressure.
The seat can be tilted back continuously to the spe­
cified angle.
Centre of gravity shifting integrated in the power wheel­
chair improves the tipping stability.
The power back angle adjustment feature enables the
backrest to be tilted up to 25°.
The backrest can be tilted back continuously to the
angle specified above.
Use
35