Configure Ethertalk (Appletalk); E-Mail, Smtp, And Pop3 Settings - Xerox WorkCentre 7300 Series Administrator's Manual

Configure EtherTalk (AppleTalk)

1. Open your Web browser and enter the TCP/IP address of the Device in the Address or Location field.
Press Enter.
2. Click the Properties tab.
3. Click the plus (+) symbol to the left of Connectivity, then the Protocols file folder.
4. Select EtherTalk in the directory tree.
Note: If EtherTalk is NOT displayed in the Properties Tab directory tree, click the Port Settings hot link
in the directory tree. Use your mouse to place a check mark in the checkbox on the EtherTalk line.
Click the Apply button
5. The available selections include:
• Printer Name.
• Zone Name.
6. Enter the name that you wish to assign to this Printer. This is the name that will appear in the
Chooser.
7. Either accept the default zone of * which lets the closest router assign the Device to a zone, or assign
the Device to a zone (with a 32 character naming limit).
8. Click the Apply button to accept changes, or the Undo button to return settings to their previous
values.
Note: Changes to settings are not applied until you restart the Device. A Reboot Machine button is
available on the Status Tab of Internet Services.

E-mail, SMTP, and POP3 Settings

The Protocols hot links for SMTP, and POP3, and the E-mail subfolder under the Services folder (on the
Properties page of Internet Services) can be used instead of the settings at the machine's User Interface,
to configure E-mail scanning with the machine.
For complete information on required E-mail settings, refer to the Scan to E-mail topic in the Options
section of this guide.
To have the Device register changes made to any settings, click the rectangular Apply button. You can
reboot the device remotely using the Reboot Machine button, which is available on the Status Tab of
Internet Services.
176