Table of Contents
Advertisement
5 Scan
Scan to PC
The following describes the procedure to select features on the [Scan to PC] screen.
On the [Scan to PC] screen, you can scan documents and send the scanned data to a
network computer via the FTP or SMB protocol. The following explains the [Scan to PC]
screen. Refer to the following for each feature.
Transfer Protocol (Selecting a Transfer Protocol) ....................................................................230
Address Book (Specifying a Destination PC Using the Address Book)...................................231
Browse... (Specifying a Destination PC by Browsing Your Network).....................................231
Specifying a Destination (Specifying a Destination PC Using the Screen Keyboard).............232
Note
1
Select [Scan to PC] from the [All Services]
screen.
2
Specify a forwarding destination on the
[Scan to PC] screen.
Note
5
Transfer Protocol (Selecting a Transfer Protocol)
You can select a transfer protocol using the following procedure.
1
Select [Transfer Protocol].
2
Select any item.
FTP
Transfers using the FTP protocol.
SMB
Transfers using the SMB protocol.
SMB (UNC Format)
Transfers using the SMB protocol (UNC Format).
UNC stands for Universal Naming Convention and its format is as follows:
ost name\shared name\directory name
\\h
230
• Before scanning, a shared folder must be created on the computer for saving scanned data.
If the FTP protocol is used, the FTP service must be set. For information on the computer
settings, refer to the documentation supplied with your operating system. For information on
compatible operating systems, refer to "15 Appendix" > "Specifications" > "Scan Function" in
the Administrator Guide.
• Fields displayed vary depending on the
protocol.
Advertisement
Table of Contents
